Machinist Calc Pro 2 Advanced Machining Math Calculator with Materials Calc-4088

CHF 79.55 Sofort-Kaufen 6d 7h, CHF 0.98 Versand, 30-Day Rücknahmen, Kostenloser PayPal-Käuferschutz in unbegrenzter Höhe.

Verkäufer: machine_dro (4,740) 99.8%, Artikelstandort: Hoddesdon, Versand nach: Worldwide, Artikelnummer: 253716532035 Machinist Calc Pro 2 Advanced Machining Math Calculator with Materials Calc-4088 Built-in Functions and Calculations: New - Machining-specific keys to enter or calculate Surface Feet per Minute (SFM), Inches per Tooth (IPT), Inches per Minute (IPM), Inches per Revolution (IPR), # of Teeth, Depth of Cut (DOC), Width of Cut (WOC) and Length of Cut (LOC) New - Materials - Choose from 20 popular Materials New - Processes - Face Milling, End Milling, Slot Milling, Turning, Boring, Drilling New - Tools - High Speed, Carbide and High Performance Speeds and Feeds - calculate for milling, turning and drilling; cutting speed, spindle speed (RPM), feed rate (IPM), cutting feed, feed per tooth/chip load, number of Teeth and Radial Chip Thinning adjustment factor Built-in Drill and Thread Size Tablessave time and steps (Compliant with ANSI/ASME B1.1-2003 and ANSI/ASME B1.13M-2005) Enter Numeric, Fractional, Metric Thread Sizes and Drill Sizes - and display tap, roll tap, close and free fit drill sizes plus pitch, major and minor diameters Right Triangle Math - plus trigonometric functions Drill Points - enter the cutting angle and drill size to calculate the drill point cut depth Bolt Pattern Layouts - enter start angle, number of bolts, diameter and optional x, y offset; calculate x and y coordinates. Find center-to-center spacing for bolt pattern layouts 3-Wire Measure - enter Wire Size (or use calculated Best Wire size) and 3-Wire Measurement to calculate pitch diameter Machine Tapping ebay shop subtitle --> Browse Shop About Us Feedback Contact Part No | ME-CALC-4088 Machinist Calc Pro 2 Advanced Machining Math Calculator with Materials Calc-4088 Ask Question Save Seller SHORT DESCRIPTION Advanced Machining Math Calculator with Materials FULL UK SUPPORT We offer full UK support on all the products we sell. Please feel free Contact us by phone or email if you have any queries regarding our products SAME DAY DISPATCH Same day despatch on all items ordered before 15:00 GMT Product Features The Machinist Calc Pro 2 now includes materials and tool settings combined with DOC and WOC to solve all your speed and feed calculations for face, end or slot milling plus turning, drilling and boring It also gives you step-saving drill and thread chart look-ups, right triangle solutions, bolt-circle patterns, a larger 2-line LCD display and much more all built into a portable, rugged and cost-effective handheld calculator Includes a rugged shock, dust and moisture resistant Armadillo Gear protective case Some dedicated features - Speeds and Feeds - Calculate for Milling, Turning, Boring and Drilling; Spindle Speed (RPM), Feed Rate (IPM), Cut Speed, Cut Feed, Feed per Tooth, Number of Teeth and Radial Chip Thinning adjustment factor Other dedicated features - Thread Sizes, Drill points, Drill sizes, 3-wire measure, trigonometric functions, right triangle math Size: 6.25" x 3.5" x 0.9" (160 mm x 90 mm x 25 mm) Product Weight - approximately 170g Power: One 3-volt (CR2025) Long-life Battery Display Type: 12 Digits (8 normal, 4 fractions) with full annunciators Display Dimensions: 0.813" x 2.5" (21 mm x 65 mm) Accuracy: 12 Digit Internal Accuracy Please Note - This Calculator is an American device and the some units of measurement may refer to the US measurements. Description Built-in Functions and Calculations: New - Machining-specific keys to enter or calculate Surface Feet per Minute (SFM), Inches per Tooth (IPT), Inches per Minute (IPM), Inches per Revolution (IPR), # of Teeth, Depth of Cut (DOC), Width of Cut (WOC) and Length of Cut (LOC) New - Materials - Choose from 20 popular Materials New - Processes - Face Milling, End Milling, Slot Milling, Turning, Boring, Drilling New - Tools - High Speed, Carbide and High Performance Speeds and Feeds - calculate for milling, turning and drilling; cutting speed, spindle speed (RPM), feed rate (IPM), cutting feed, feed per tooth/chip load, number of Teeth and Radial Chip Thinning adjustment factor Built-in Drill and Thread Size Tablessave time and steps (Compliant with ANSI/ASME B1.1-2003 and ANSI/ASME B1.13M-2005) Enter Numeric, Fractional, Metric Thread Sizes and Drill Sizes - and display tap, roll tap, close and free fit drill sizes plus pitch, major and minor diameters Right Triangle Math - plus trigonometric functions Drill Points - enter the cutting angle and drill size to calculate the drill point cut depth Bolt Pattern Layouts - enter start angle, number of bolts, diameter and optional x, y offset; calculate x and y coordinates. Find center-to-center spacing for bolt pattern layouts 3-Wire Measure - enter Wire Size (or use calculated Best Wire size) and 3-Wire Measurement to calculate pitch diameter Downloads & Additional Information For further product information please feel free to contact us About us Machine DRO are suppliers of Digital Readout Systems, Measuring Tools, Machine Tools. Established in the UK in 2003 and we pride ourselves on providing top quality tools and equipment with professional customer service and support to both professionals and hobbyists. Why Machine DRO? Full UK Support Same Day Despatch Specialist Store Quality Products Ebay links Our Store Other Items Feedback Send message eBay integration by Condition: New, Brand: Calculated Industries, MPN: ME-CALC-4088, Part Number: ME-CALC-4088

hi-grd.com Insights hi-grd.com Exklusiv
  •  Popularität - 952 blicke, 6.6 views per day, 144 days on eBay. Super hohe von blicke. 13 verkauft, 29 verfügbar.
  •  Preis -
  •  Verkäufer - 4,740+ artikel verkauft. 0.2% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.
Ähnliche Artikel Items
Sitemap